You set this value to No to free up an IRQ. If you press Y, and then Enter, the Setup Utility loads a set of bestperformance default values. Use these items to determine the device order the computer uses to look for an operating system to load at start-up time. When the Save and Exit dialog box appears, press Y to save and exit, or press N to exit without saving. If you press Y, and then Enter, the Setup Utility loads a set of fail-safe default values. Following these steps to install the memory module. If you are adding an infrared port, connect the ribbon cable from the port to the IR1 connector and then secure the port to an appropriate place in your system chassis.
|Date Added:||8 December 2005|
|File Size:||58.54 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Therefore, it might happen under Windows XP that a dialogue audiio shown as below pop out warning you this software has not passed Windows Logo testing to verify its compatibility with Windows XP.
PC Chips M935DLU (V2.0) Audio Driver
Use this item to set the parallel port mode. If you press the F3 key, the system will automatically detect and configure the hard disks on the IDE channels.
You may need to clear the CMOS memory if the settings in the Setup Ausio are incorrect and prevent your mainboard from operating. We recommend you leave this item at the default value.
It is recommended that you leave this item at the default value. The system can be turned off with a software command.
Install your drives and connect power from the system power supply. If you press Y, and then Enter, the Setup Utility loads a set of fail-safe default values. Push the locking lever down and hook it under the latch on the edge of socket.
Install the mainboard in a case. Select the items that you want to setup by clicking on it the default options are recommended. Remove a slot cover from one of the expansion slots on the system chassis.
PC CHIPS MDLU (V) |
Mainboard Components Use the diagram below audik identify the major components on the mainboard. Use these items to enable or m935vlu the onboard COM1 serial port, and to assign a port address. Other options on the main menu page lead to dialog boxes requiring you to answer Yes or No by hitting the Y or N keys.
Any incorrect usage may cause unexpected damage to the system. The system will automatically detect the kind of CPU that you have installed and make the appropriate adjustments to the items on this page.
PC Chips MDLU (V) driver – PC Chips Sound Card Drivers –
J935dlu is a list of the chipset arrangement and their respective features: To leave the setup utility, press the Escape key. Enable this item if you plan to use the USB xudio on this mainboard.
If you are adding an infrared port, connect the ribbon cable from the port to the IR1 connector and then secure the port to an appropriate place in your system chassis. If you enable this item, the system can automatically resume if there is an incoming call on the Modem. Use these items to determine the device order the computer uses to look for an operating system to load at start-up time. Install any remaining DIMM modules.
If you enable this item, your auido will check all floppy disk drives at start up.
The ReadMe brings you to the Install Path where you can find out path names of software driver. You can purchase your own optional accessories from the third party, but please contact your local vendor on any issues of the specification and compatibility.
During installation put the mainboard on top of the static-protection packaging it came in with the component side facing up. You might need to do this to configure some of the hardware that you install on sudio connect to the mainboard, such as the CPU, system memory, disk drives, etc.
I Static Electricity Precautions Unhook the locking lever of the CPU socket. Click the software you want to install. Press Enter after you have retyped it correctly.
Audio Ports Use the three audio ports to connect audio devices.