XANTE ACCEL A WRITER 3G DRIVER

If not corrected — replace the fuser unit. If the problem occurs from all trays, perform X-ACT calibration which corrects for skew. Please contact Tech Support if you are not familiar with performing this adjustment. Can’t find my model. These cartridges are designed to meet or in some cases even exceed the standards set by the OEM in terms of performance, print quality and page yield.

Uploader: Douzil
Date Added: 1 December 2015
File Size: 16.77 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 11329
Price: Free* [*Free Regsitration Required]

These cartridges are designed to meet or in some cases even exceed the standards set by the OEM in terms of performance, print quality and page yield. DO NOT use media that is specially coated, synthetically reinforced, colored with surface treatment, or heavily textured.

Engine tolerances for this printer 33g plus or minus 2 mm.

If not corrected — replace the fuser unit. If the wrriter is still occurring, the EP setting may need adjustment. The best tool for this is an Ethernet cross-over cable, a cable that connects two devices directly without the need for a hub or switch. The paper guides in the tray are probably out of place.

I am getting tear drops on axnte output. Please contact Technical Support to discuss the options available to correct this.

See Also  LG GDR8163B CD ROM DRIVER

Xanté Accel-a-Writer 3G Specs – CNET

Track your order Order number: After that, you must contact the OEM company directly. Oversatisfied clients since This is acvel when arcing occurs across the surface of the toner drum. Our acquisitions team is preparing to extend the TonerMAX.

We will handle all warranty issues within the first 30 days of receiving the product. Connect the PC directly to the printer using the cross-over cable and test communication. MEDIA for the media type on which you are printing. Larger Quantities We can help you now!

If it only occurs from a single tray, then observe the pickup rollers and see if they are causing the media to be fed through the printer at an angle.

Often, we are able to locate some internationally, or to propose alternatives to keep you printing. DHCP may not be setup xnte assign addresses correctly which will reassign the IP address each time you restart your printer.

Free Shipping On Xante Accel-A-Writer 3G Supplies AccelAWriter 3G.

Templates Workflow Customer Videos Events. The printer is formatting the page for the wrong size media. Until we can be sure to deliver the same level wrietr customer satisfaction we can ensure in the USA, we’d rather not accept your order than risk letting you down.

See Also  FUJITSU SCANNER S510 DRIVER DOWNLOAD

Accounting Dept Fax or Jenny’s Printer. Check to see if the skew occurs from all trays or only one tray. If not corrected — contact Technical Support. Xante Accel-a-Writer 3DN uses these supplies. If these values are entered manually instead of through DHCP then the DHCP setting on the printer must be turned off in order for the settings to apply.

Make sure the printer has been rebooted after changing IP parameters. The toner cartridge also may be getting close to end of life; if so, replacing the toner cartridge should help to resolve the issue.

Make sure that you get it seated properly. In every case, we will be prompt and proactive in our communication wrlter you about any sourcing delays. Check both ends to ensure each springs back. Product Substitution Policy Occasionally severe back-orders or other conditions could cause a major delay in the delivery of your order.

A shipping error occurred on our side.